A console cabinet with two wide drawers and an open shelf below. Use it in the entryway, behind a sofa or as a media console.
Download the free PDF preview below to see the overall size, the dimensioned views and the tools you need. When you are ready to build, the full plan gives you the complete cut list, shopping list and every assembly step.
Project at a glance
- Overall size: 17" D x 37" W x 35" H
- Skill level: Beginner
- Build time: 4–6 hours
- Main materials: 1/4" Plywood, 3/4" Plywood, Western Red Cedar Lumber 2"×2"
- Tools: Circular Saw, Drill & Driver, Pocket-Hole Jig, Combination Square, Drawer Handle Drilling Jig
What's in the free preview
- Cover sheet with overall size, skill level and build time
- Dimensioned front, side, top and 3D views
- Estimated build time and recommended tools
- Nominal vs. actual lumber size chart
What you get in the full plan
- Complete material shopping list with quantities
- Complete cutting list with every board length
- 9 illustrated step-by-step assembly instructions
- Screw locations, pre-drilling and fastening details
- Finishing, safety and care notes
- 18-page printable PDF (8.5" x 11")
Get the full Two-Drawer Console Table with Open Shelf 17" x 37" x 35" plan for $9.99 →
How the build comes together
Here is the order of work in the full plan:
- Assemble the dresser sides
- Assemble the dresser frame
- Attach the horizontal drawer dividers
- Install the drawer slides
- Build the drawer boxes
- Install the drawer boxes
- Install the drawer fronts
- Install the top panel
- Finish as desired and add drawer pulls
Tips before you start
- Check that the case is square before installing drawer slides – it makes drawers run smoothly.
- Use spacers when setting drawer fronts for even gaps.
- Paint or stain parts before final assembly for a cleaner finish.
FAQ
Is this plan free?
The preview PDF is free. It shows the size, dimensioned views and tool list. The complete plan with the cut list and step-by-step instructions is $9.99.
Can a beginner build it?
Yes. The plan is rated beginner and uses simple screwed joints and common tools.
Are the measurements in inches?
Yes, all plans use imperial units (feet and inches) and US lumber sizes.
How do I get the full plan?
Buy it on the Two-Drawer Console Table with Open Shelf 17" x 37" x 35" plan page and we email you the complete PDF.
