Free download PDF

Picnic Table Chicken & Squirrel Feeder Plans Free Download

Free picnic table feeder for chickens, wild birds, ducks & squirrels plan preview (PDF): size, dimensioned drawings and tool list. Get the full plan with cut list and step-by-step instructions for $9.99.
Free sample plan2 min readUpdated Oct 2026
Picnic Table Chicken & Squirrel Feeder Plans Free Download

A fun mini picnic-table feeder for chickens, ducks, wild birds or squirrels. Benches double as perches and the tray keeps feed in place. It's a small, quick build from 1x2 cedar.

Download the free PDF preview below to see the overall size, the dimensioned views and the tools you need. When you are ready to build, the full plan gives you the complete cut list, shopping list and every assembly step.

Project at a glance

  • Overall size: 16.5" W x 16" D x 10" H
  • Skill level: Beginner
  • Build time: 4–6 hours
  • Main materials: Western Red Cedar Lumber 1x2
  • Tools: Miter Saw, Jigsaw, Drill & Driver, Countersink Drill Bit, Clamps, Orbital Sander, Tape Measure, Speed Square, Paintbrushes

What's in the free preview

  • Cover sheet with overall size, skill level and build time
  • Dimensioned front, side, top and 3D views
  • Estimated build time and recommended tools
  • Nominal vs. actual lumber size chart

What you get in the full plan

  • Complete material shopping list with quantities
  • Complete cutting list with every board length
  • 6 illustrated step-by-step assembly instructions
  • Screw locations, pre-drilling and fastening details
  • Finishing, safety and care notes
  • 17-page printable PDF (8.5" x 11")

Get the full Picnic Table Feeder for Chickens, Wild Birds, Ducks & Squirrels plan for $9.99 →

How the build comes together

Here is the order of work in the full plan:

  1. Cut and pre-drill the members
  2. Assemble the two end frames
  3. Position the end frames
  4. Attach the bench boards
  5. Install the tray bottom
  6. Assemble the tray rim

Tips before you start

  • Use untreated or naturally rot-resistant wood around animals.
  • Place feeders and roosts where they are easy to clean.
  • Check for loose screws or splinters every few months.

FAQ

Is this plan free?
The preview PDF is free. It shows the size, dimensioned views and tool list. The complete plan with the cut list and step-by-step instructions is $9.99.

Can a beginner build it?
Yes. The plan is rated beginner and uses simple screwed joints and common tools.

Are the measurements in inches?
Yes, all plans use imperial units (feet and inches) and US lumber sizes.

How do I get the full plan?
Buy it on the Picnic Table Feeder for Chickens, Wild Birds, Ducks & Squirrels plan page and we email you the complete PDF.