Free download PDF

Toddler Table and 2 Chairs Plans Free Download (PDF)

Free toddler table and 2 chairs plan preview (PDF): size, dimensioned drawings and tool list. Get the full plan with cut list and step-by-step instructions for $9.99.
Free sample plan2 min readUpdated Oct 2026
Toddler Table and 2 Chairs Plans Free Download (PDF)

A toddler-size table with two matching slat-back chairs for snacks, coloring and play.

Download the free PDF preview below to see the overall size, the dimensioned views and the tools you need. When you are ready to build, the full plan gives you the complete cut list, shopping list and every assembly step.

Project at a glance

  • Overall size: Table 24" W x 21" D x 20" H
  • Skill level: Beginner
  • Build time: 4–6 hours
  • Main materials: Western Red Cedar Lumber 1x2, Western Red Cedar Lumber 2x4
  • Tools: Miter Saw, Jigsaw, Drill & Driver, Countersink Drill Bit, Clamps, Orbital Sander, Tape Measure, Speed Square, Paintbrushes

What's in the free preview

  • Cover sheet with overall size, skill level and build time
  • Dimensioned front, side, top and 3D views
  • Estimated build time and recommended tools
  • Nominal vs. actual lumber size chart

What you get in the full plan

  • Complete material shopping list with quantities
  • Complete cutting list with every board length
  • 7 illustrated step-by-step assembly instructions
  • Screw locations, pre-drilling and fastening details
  • Finishing, safety and care notes
  • 14-page printable PDF (8.5" x 11")

Get the full Toddler Table and 2 Chairs plan for $9.99 →

How the build comes together

Here is the order of work in the full plan:

  1. Assemble the two side frames
  2. Attach the rear posts
  3. Install the four seat boards
  4. Install the three backrest boards
  5. Assemble the second chair
  6. Assemble side frames for table
  7. Install the tabletop boards for table

Tips before you start

  • Sand every edge smooth and round the corners for little hands.
  • Use a non-toxic, child-safe finish.
  • Check screws regularly and keep them flush with the surface.

FAQ

Is this plan free?
The preview PDF is free. It shows the size, dimensioned views and tool list. The complete plan with the cut list and step-by-step instructions is $9.99.

Can a beginner build it?
Yes. The plan is rated beginner and uses simple screwed joints and common tools.

Are the measurements in inches?
Yes, all plans use imperial units (feet and inches) and US lumber sizes.

How do I get the full plan?
Buy it on the Toddler Table and 2 Chairs plan page and we email you the complete PDF.