60" Computer Desk with Two Drawers and Open Shelf Plan

A 60-inch desk with a built-in drawer cabinet: two drawers on ball-bearing slides plus an open shelf. The plan covers the desk frame, the cabinet, drawer boxes, fronts and pulls.

This is a digital DIY plan (PDF), not a finished product. You get clear, beginner-friendly drawings and instructions to build it yourself.

Plan details

• Overall size: 60" W x 21" D x 31.5" H
• Skill level: Beginner
• Estimated build time: 8–12 hours
• Format: 26-page PDF, 8.5" x 11", imperial units (feet & inches)

What's included

• Cover sheet with size, skill level and build time
• Dimensioned front, side, top and 3D views
• Material shopping list and complete cutting list
• Nominal vs. actual lumber size chart
• 13 illustrated step-by-step assembly instructions
• Finishing, safety and care notes

Build steps

1. Assemble side frames for table
2. Add the upper supports for table
3. Install the tabletop boards for table
4. Assemble the dresser sides
5. Assemble the dresser frame
6. Attach the horizontal drawer dividers
7. Install the drawer slides
8. Build the drawer boxes
9. Install the drawer boxes
10. Assemble the drawer fronts
11. Install the drawer fronts
12. Install the drawer pulls
13. Position the drawer unit under the table

Materials

• Western Red Cedar Lumber 2"×4" – 6 pcs, 10 ft
• Wood Screws 2-1/2" – 36 pcs
• Western Red Cedar Lumber 2"×2" – 4 pcs, 8 ft
• 1/4" Plywood – 1 pc, 4ft x 8 ft
• 3/4" Plywood – 1 pc, 4ft x 8 ft
• 1-1/4" Pocket-hole screws – 46 pcs
• 2-1/2" Pocket-hole screws – 24 pcs
• 5/8" Wood screws for slides – 24 pcs
• 1-1/4" Wood screws – 4 pcs
• 20" Ball-bearing drawer slides – 4 pcs
• Wood Glue – 1 pc
• Drawer Pull – 2 pcs

Recommended tools

Circular Saw, Drill & Driver, Pocket-Hole Jig, Clamps, Sander, Tape Measure, Combination Square, Drawer Handle Drilling Jig, Safety Glasses

Delivery

After purchase we email you the PDF plan. Print it or use it on your phone or tablet in the workshop. For personal use only.