A freestanding 8-foot roosting bar with ladders on both ends, so your flock can perch in the run or coop. It's built entirely from 2x2 lumber.
Download the free PDF preview below to see the overall size, the dimensioned views and the tools you need. When you are ready to build, the full plan gives you the complete cut list, shopping list and every assembly step.
Project at a glance
- Overall size: 96" W x 18" D x 30" H
- Skill level: Beginner
- Build time: 4–6 hours
- Main materials: Western Red Cedar Lumber 2x2
- Tools: Miter Saw, Jigsaw, Drill & Driver, Countersink Drill Bit, Clamps, Orbital Sander, Tape Measure, Speed Square, Paintbrushes
What's in the free preview
- Cover sheet with overall size, skill level and build time
- Dimensioned front, side, top and 3D views
- Estimated build time and recommended tools
- Nominal vs. actual lumber size chart
What you get in the full plan
- Complete material shopping list with quantities
- Complete cutting list with every board length
- 6 illustrated step-by-step assembly instructions
- Screw locations, pre-drilling and fastening details
- Finishing, safety and care notes
- 13-page printable PDF (8.5" x 11")
Get the full Chicken Roosting Bar 96" x 18" x 30" plan for $9.99 →
How the build comes together
Here is the order of work in the full plan:
- Assemble the base frame
- Assemble the top roosting frame
- Assemble the two ladders
- Position the base and top frames
- Install the four upright posts
- Attach the ladders
Tips before you start
- Use untreated or naturally rot-resistant wood around animals.
- Place feeders and roosts where they are easy to clean.
- Check for loose screws or splinters every few months.
FAQ
Is this plan free?
The preview PDF is free. It shows the size, dimensioned views and tool list. The complete plan with the cut list and step-by-step instructions is $9.99.
Can a beginner build it?
Yes. The plan is rated beginner and uses simple screwed joints and common tools.
Are the measurements in inches?
Yes, all plans use imperial units (feet and inches) and US lumber sizes.
How do I get the full plan?
Buy it on the Chicken Roosting Bar 96" x 18" x 30" plan page and we email you the complete PDF.
