A complete patio lounge set with a loveseat, two armchairs and a matching coffee table. It's built from 2x4 and 1x4 lumber with cushions in standard sizes.
Download the free PDF preview below to see the overall size, the dimensioned views and the tools you need. When you are ready to build, the full plan gives you the complete cut list, shopping list and every assembly step.
Project at a glance
- Overall size: Loveseat, 2 armchairs & coffee table
- Skill level: Beginner
- Build time: 4–6 hours
- Main materials: Western Red Cedar Lumber 1"×4", Western Red Cedar Lumber 2"×4"
- Tools: Miter Saw, Jigsaw, Drill & Driver, Countersink Drill Bit, Clamps, Orbital Sander, Tape Measure, Speed Square, Paintbrushes
What's in the free preview
- Cover sheet with overall size, skill level and build time
- Dimensioned front, side, top and 3D views
- Estimated build time and recommended tools
- Nominal vs. actual lumber size chart
What you get in the full plan
- Complete material shopping list with quantities
- Complete cutting list with every board length
- 15 illustrated step-by-step assembly instructions
- Screw locations, pre-drilling and fastening details
- Finishing, safety and care notes
- 31-page printable PDF (8.5" x 11")
Get the full The Haven Outdoor Lounge Set plan for $9.99 →
How the build comes together
Here is the order of work in the full plan:
- Assemble the two side frames for two seater
- Attach the rear posts for two seater
- Attach the front posts for two seater
- Install the armrests for two seater
- Install the six seat boards for two seater
- Install the three backrest boards for two seater
- Assemble the two side frames for one seater
- Attach the rear posts for one seater
- Attach the front posts for one seater
- Install the armrests for one seater
- Install the six seat boards for one seater
- Install the three backrest boards for one seater
- Assemble side frames for table
- Install the tabletop boards for table
- Install the lower shelf for table
Tips before you start
- Use exterior screws and an outdoor-rated finish for furniture that lives outside.
- Round over sharp edges with sandpaper for comfort.
- Re-coat the finish every season to keep the wood protected.
FAQ
Is this plan free?
The preview PDF is free. It shows the size, dimensioned views and tool list. The complete plan with the cut list and step-by-step instructions is $9.99.
Can a beginner build it?
Yes. The plan is rated beginner and uses simple screwed joints and common tools.
Are the measurements in inches?
Yes, all plans use imperial units (feet and inches) and US lumber sizes.
How do I get the full plan?
Buy it on the The Haven Outdoor Lounge Set plan page and we email you the complete PDF.
